Your friend in the digital age
Skip To Menu
Skip To Content
You are here: Residential Home > Support > TV Support > DVR Recording > Assign a Default DVR

TV

Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.

Back Print Article

Assign a Default DVR

Last Updated: Fri, 13 Jan 2012 > Related Articles

Not Rated

Summary

If you have a client receiver in the Whole Home Multi-DVR setup, you'll want to assign it a default DVR.

Solution

The Default DVR feature makes it easier record programs from an HD cable box and store them to the same DVR each time.
1
Go to the HD cable box that's not a DVR.
2
Press the SETTINGS button on the remote.
3
  1. Highlight the Receivers option and press SELECT.
    Result: DVR Network displays in the middle box.
  2. Highlight the DVR Network option and press SELECT.
4

Highlight the Set Default DVR option and press SELECT.
Note: Info about the HD cable box you will assign a DVR is listed in the left box. In the example below, the name of the HD cable box is "Client" and it is an "HD" receiver.

 

5
  1. Use the left or right arrow buttons to highlight the name of the DVR you want. 
    Note: In example image below, we chose the BEDROOM DVR to make the recordings selected by the Client HD Receiver. 
  2. Press the B button to save the setting.

 


Rate this Article:

Related Topics:

DVR Recording

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need more help?

Suggested TV Topics