• Español
  •  
  • Select a Location

    Welcome!

    Let us know the location you'd like to browse.

    or

    Already a Cox Residential customer?

    Looking for Business services? Go to Cox Business home

TV

Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.

Back Print Article

Program the Cox Navigator M4078 Remote Control for a TV, VCR, or Stereo Receiver

Last Updated: Wed, 09 Jan 2013 > Related Articles

1 rated this

Summary

If the Cox Navigator M4078 Remote Control does not work with your TV, VCR, or stereo receiver, program the remote using the steps below.

Solution

Cox Navigator M4078 Remote Control

To program the remote to control your device, perform the following steps:
1
  1. Turn on the device that you want the remote control to control.
  2. If appropriate, insert media such as a cassette or disc.
  3. Before moving to step 2, read steps 2 through 5 completely. Highlight or write down the codes and device you want to program.
2
  1. Point the remote control away from all devices.
  2. Press the mode button associated with the device you want the remote control to control.
  3. Press and hold the SETUP button until the red light blinks twice, and then release the SETUP button.
3
  1. Refer to the manufacturer’s codes to locate the code for the type and brand name of the device that you want the remote control to control.
  2. Using the number buttons on the remote, enter the first three-digit code listed in the manufacturer's codes for your device.

    Result: The red light blinks twice.
4

Aim the remote at the device, and then press the POWER button.

Note: If you are programming the remote control to control a VCR, and the remote that came with the VCR does not have a power button, then press the play button between the fast-forward and rewind buttons on the Cox Navigator M4078 Remote Control.

Result:

  1. The device turns off.

    Note: If you pressed the play button, the VCR starts to play
  2. If the device does not operate properly, repeat steps 2 – 4, trying each code listed in the manufacturer's codes for the device brand until you find one that works.
  3. If the device still does not operate properly, refer to Search for a Code to Program the Cox Navigator M4078 Remote Control for a TV, VCR, or Stereo Receiver.

    All steps complete.

 


Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?