Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.
Program Volume Controls on the Universal M7810 Remote Control
Last Updated: Fri, 19 Aug 2011 > Related Articles
Follow these steps to set the Universal M7810 Remote Control to control the volume of a device.
The Cox Universal M7810 Remote Control is set to control the volume of a device:
- Through your TV while in TV, DVD, or Cable mode
- Through the auxiliary device when in Auxiliary (AUX) mode
Change the Volume Lock setting if:
You want the volume to be controlled by a device not associated with the current mode.
- For example, you can set the remote control to control the volume through the cable receiver when in TV mode.
Volume Lock affects the following buttons:
Cox Universal Remote Control
To program the Volume Lock, perform the following steps:
Note: Performing these steps to program Volume Lock for AUX mode allows you to access the volume control for the auxiliary device in all modes.
|Type of Device||Mode Button|
|Stereo amplifier or receiver||AUX|
|DVD, PVR, VCR||DVD|
Using the number keys, enter 9 - 9 - 3.
Result: The selected mode button blinks twice.
Press the mode button once.
Result: The selected mode button blinks twice. The Volume Control is set.
All steps complete.