• Español
  •  
  • Ashburn, VA

    Let us know the location you'd like to browse.

    or

    Already a Cox Residential customer?

    Looking for Business services? Go to Cox Business home

TV

Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.

Back Print Article

Search for a Code to Program the Cox Digital Interactive M1054 Remote Control for a TV, DVD, VCR, or Stereo Receiver

Last Updated: Thu, 24 Jun 2010 > Related Articles

16 rated this

Summary

Follow these steps to search for an alternate code if a home entertainment device does not respond to the remote control after trying all of the codes listed in the list of manufacturer's codes for your brand.

Solution

If a home entertainment device does not respond to the Cox Digital Interactive M1054 Remote Control after you tried all of the codes listed in the list of manufacturer's codes for your brand, or if your brand is not listed at all, try programming the remote control to auto-search for an alternate code.

For additional information on programming the Cox Digital Interactive M1054 Remote Control for a home entertainment device, refer to Program the Cox Digital Interactive M1054 Remote Control for a TV, DVD, VCR, or Stereo Receiver.


Cox Digital Interactive M1054 Remote Control

 

To search for a code for a device, perform the following steps:

  1. Turn on the device that you want the remote control to control.
  2. On the remote control, press the appropriate mode button for the device once.

    Type of DeviceMode Button
    VCR, TV / VCR combo, PVR, second DVD playerAUX
    DVD playerDVD
    Audio amplifier, tuner, or receiverAUD
    TelevisionTV


    Result: The selected mode button blinks once.

  1. Press and hold the SETUP button until the selected mode button blinks twice, then release the SETUP button.
  2. Using the number keys, enter 9 - 9 - 1.

    Result: The selected mode button blinks twice.

  3. Aim the remote control at the device and alternate between pressing the PWR button and the selected mode button. Keep alternating until the device turns off.

    Result: The device turns off indicating the code worked.

    Note: In search mode, the remote control sends IR codes from its library to the selected device, starting with the most popular code first

  4. Press the SETUP button once to lock in the code.

    Result: The selected mode button blinks twice.
  5. To search for codes for other devices, repeat steps 1 - 6.

    All steps complete.



Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?