• Español
  •  
  • Select a Location

    Welcome!

    Let us know the location you'd like to browse.

    or

    Already a Cox Residential customer?

    Looking for Business services? Go to Cox Business home

TV

Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.

Back Print Article

Search for a Code to Program the Cox Navigator M4078 Remote Control for a TV, VCR, or Stereo Receiver

Last Updated: Wed, 09 Jan 2013 > Related Articles

1 rated this

Summary

Follow these steps to search for an alternate code if a home entertainment device does not respond to the remote control after trying all of the codes listed in the list of manufacturer's codes for your brand.

Solution

If a home entertainment device does not respond to the Cox Navigator M4078 Remote Control after you tried all of the codes listed in the list of manufacturer's codes for your brand, or if your brand is not listed at all, try searching for your code.

Note: For additional information on programming the Cox Navigator M4078 Remote Control for a home entertainment device, refer to Program the Cox Navigator M4078 Remote Control for a TV, VCR, or Stereo Receiver.

Cox Navigator M4078 Remote Control

 

To search for a code for a device, perform the following steps:

Note: The mode buttons blink twice when the remote reaches the last code in a library. Each mode button has a library of codes associated with it. The number of codes in a library determines how long it will take to check all of the codes in that library.

  1. Turn on the device for which you want to find a code.
  2. Point the remote control at the device and press the mode button associated with the device.
  3. Press and hold the SETUP button until the red light blinks twice, and then release the SETUP button.
  4. Using the number buttons, enter 9 - 9 - 1.
  5. Slowly alternate between pressing the POWER button and the mode button until the device turns off. There may be as many as 100 codes stored in the remote control, so keep pressing the Power and mode buttons.

    Note: If you are searching for a code for a VCR, press the play button between the fast-forward and rewind buttons instead of the POWER button.

    Result:  The device turns off, or, if you pressed the play button, the VCR starts playing.

  6. Immediately, press the SETUP button to lock in the code.

    All steps complete.



Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?