• Español
  •  
  • Ashburn, VA

    Let us know the location you'd like to browse.

    or

    Already a Cox Residential customer?

    Looking for Business services? Go to Cox Business home

TV

Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.

Back Print Article

Program the Universal M7820 Remote Control for a TV, DVD, VCR, or Stereo Receiver

Last Updated: Fri, 19 Aug 2011 > Related Articles

199 rated this

Summary

Use this article to program the Cox DVR Universal M7820 Remote Control to control devices other than the default brands.

Solution

Cox DVR Universal Remote Control

To control devices other than the default brands, perform the following steps:

1
  1. Turn on the device that you want the remote control to control.
  2. If applicable, insert video media, such as a VHS cassette or DVD disc.
  3. Please read steps 2 – 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving to step 2.
2
  1. On the remote control, press the appropriate mode button for the device once.
     
    Type of DeviceMode Button
    TelevisionTV
    Stereo amplifier or receiverAUX
    DVD, PVR, VCRDVD

  2. Press and hold the SETUP button until the selected mode button blinks twice, then release the SETUP button.

Note: To program the remote for a TV / VCR combination, refer to Program the Cox DVR Universal M7820 Remote Control for a TV / VCR Combination.

3
  1. Refer to the manufacturer’s codes to locate the code for the type and brand name of the device that you want the remote control to control.
  2. Using the number buttons on the remote, enter the first four-digit code listed in the manufacturer's codes for your device.

    Result:
  • If the selected mode button blinks twice, the operation was performed correctly.
  • If the selected mode button emits a long blink, the operation was not successful. Repeat steps 2 and 3 using the same code again.
4

Aim the remote control at the device, and then press the POWER button once.

Note: If the device does not have a POWER button, press the Play button on the remote.

Result:

5

Repeat steps 1 through 4 for each device you want the remote control to control.

All steps complete.

 


Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?