• Español
  •  
  • Ashburn, VA

    Let us know the location you'd like to browse.

    or

    Already a Cox Residential customer?

    Looking for Business services? Go to Cox Business home

Internet

The Internet should add convenience, not headaches. From step-by-step instructions to helpful tips, we'll help you install your equipment, troubleshoot problems, and get the most out of your online experience – minus the migraine.

Back Print Article

Switch the Panasonic VT20 3DTV to 3D Mode

Last Updated: Tue, 22 Feb 2011 > Related Articles

5 rated this

Summary

This describes how to switch the Panasonic VT20 3DTV to 3D Mode.

Solution

Before you switch the Panasonic VT20 Series 50-Inch 1080P 240HZ 3D Plasma HDTV to 3D mode, make sure:

  1. The Cox HD receiver is connected to the 3DTV via an HDMI  cable
  2. The special 3D glasses are Panasonic model number TY-EW3D10
  3. You are tuned to the Cox3D channel for viewing 3D programming

Note: For other models of 3D-enabled televisions, please consult the User Guide that came with the TV.

1

On the remote that came with the 3DTV, press the Viera Tools button, located on top right above the Return button.

2

Press the OK button to select the 3D icon. 

Result: The 3D Settings screen will display. 

3

Set 3D Eyewear field to On.

4

Set 3D Input format to Side by Side.

5

Check to see that Left/Right Swap default is Normal.

Check to see the Diagonal Line Filter default is set to Off.

6

On 3D Glasses that came with 3DTV:

Press and hold power button on glasses for 2-3 seconds, then release. (Power button located on left temple bar.)

Result: The picture will be viewable in 3D.

All steps complete.  

 


Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?