Learn how to protect, connect, and relax with support for your Home Security service. From arming and disarming your alarm, to managing your portal, Cox Home Security Support helps you with troubleshooting and step-by-step solutions.
Troubleshooting the Cox Home Security Key Fob and Keypad
Last Updated: Mon, 31 Mar 2014 > Related Articles
See troubleshooting tips to common issues with the Cox Home Security key fob and keypad.
The tables below offer troubleshooting explanations to common issues with the Cox Home Security key fob and keypad.
Learn more about how to troubleshoot the Cox Home Security key fob.
Take your key fob and stand in front of the touchscreen.
Push the asterisk (*) button on the middle of the key fob and use the table below to diagnose the light sequence flashes you receive.
|If the light on the key fob...||Then the key fob is...|
|Flashes red four times||Not communicating with the touchscreen. Contact Customer Support.|
|Flashes three times every five seconds||Not paired. Contact Customer Support.|
Does anything else such as:
|Communicating with the touchscreen. Continue to step 4.|
If the key fob is still not functioning normally take these steps:
- If the key fob is not arming, stand closer to the touchscreen.
- Do not stand behind barriers that may be in the way. For example walls, garage doors, inside car etc. should be avoided.
Going through any types of walls or while inside a car the key fob will only have a range of 25 to 50 feet.
If you don't have any barrier obstructions and the key fob isn't functioning, contact Customer Support.
See the table below for solutions to common problems with keypad operations.
|Low Battery||Batteries will need to be replaced. Contact Customer Support.|
|Communication Failure||Contact Customer Support to activate keypad to test, perform sensor test.|
|Poor Wireless Sensor Strength||Move or rotate the sensor.|
|Tamper||Cover has been physically removed from its base check sensor mounting.|
|Dead Battery||Will start with low battery message and end with communication failure. Contact Customer Support.|
|Sensor Failure||Make sure the battery is good and installed correctly. Contact Customer Support.|