Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.
Assign a Default DVR
Last Updated: Fri, 13 Jan 2012 > Related Articles
If you have a client receiver in the Whole Home Multi-DVR setup, you'll want to assign it a default DVR.
- Highlight the Receivers option and press SELECT.
Result: DVR Network displays in the middle box.
- Highlight the DVR Network option and press SELECT.
Highlight the Set Default DVR option and press SELECT.
Note: Info about the HD cable box you will assign a DVR is listed in the left box. In the example below, the name of the HD cable box is "Client" and it is an "HD" receiver.
- Use the left or right arrow buttons to highlight the name of the DVR you want.
Note: In example image below, we chose the BEDROOM DVR to make the recordings selected by the Client HD Receiver.
- Press the B button to save the setting.