Internet
The Internet should add convenience, not headaches. From step-by-step instructions to helpful tips, we'll help you install your equipment, troubleshoot problems, and get the most out of your online experience – minus the migraine.
Linksys WCG200 v2 Cable Modem
Last Updated: Thu, 23 Aug 2012 > Related Articles
Summary
Learn about the available ports and the status lights on a Linksys WCG200 v2 cable modem.
Solution
The Linksys WCG200 v2 is a DOCSIS 2.0 cable modem.
Front View
After the cable modem has successfully registered on the network, the Power, and Online indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.
Back View
The Linksys WCG200 v2 has the following ports available on the back of the modem:
- Power - Connects the cable modem to the power adapter.
- Reset - Used to reset the modem.
- 1, 2, 3, 4 - Connects to the Ethernet port on your computer(s).
- USB - Connects to the USB port on your computer.
- CABLE - Connects to the cable wall outlet.
Note: The Reset button is for maintenance purposes only. For more details, refer to the Modem Lights section.
Modem Lights
The modem lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below.
| Ethernet Connection - Modem functioning correctly |
| USB Connection - Modem functioning correctly |
| Wireless Connection - Modem functioning correctly |
| Modem Looking for Cable Connection |
| Modem Light | Status | Problem | Solution |
|---|---|---|---|
| Power | Solid Green | None. Power is properly connected. | N/A |
| Off | No power | Verify power supply connections and electrical outlet. Also make sure the outlet is not connected to a switch. | |
| DS | Slow Flashing green | Searching for cable connection. | Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support. |
| Fast Flash Modem | Searching for cable connection. | If this is a new modem or a replacement modem, you must contact Cox with your MAC address. If there are several MAC addresses on the modem, use the MAC address. View MAC address Label | |
| Off | No connection cable connection. | Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support. | |
| US | Flashing green | Looking for upstream. | Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support. |
| Solid green | None. Modem found connection. | N/A | |
| Online | Solid green | None. Cable modem is registered, network access enabled. | N/A |
| ETH 1-4 | Solid Green | None. Successfully found the computer through an Ethernet connection. | N/A |
| Flashing Green | None. Modem is transferring data. | N/A | |
| Off | No Ethernet found | Verify Ethernet cable connections, the TCP/IP settings and the NIC. You might need to reinstall the NIC drivers. If this does not resolve the issue, contact Customer Support. | |
| USB | Solid Green | None. Successfully found the computer through USB connection. | N/A |
| Off | No USB found | Verify USB cable connections, the TCP/IP settings and the USB cable. You might need to reinstall the USB drivers. If this does not resolve the issue, contact Customer Support. | |
| Wireless | Flashing Green | None. Modem is transferring data via a wireless connection. | N/A |
Need More Help?
-
Technical Support
Live Chat
-
Send An Email To
Cox.com
-
Join the Discussion
Support Forums
-
Find Your Nearest
Service Center
-
Give Us A Call
24/7 Phone Support
-
Additional Contacts
Local Information