Your friend in the digital age
Skip To Menu
Skip To Content
You are here: Residential Home > Support > Internet Support > Equipment Setup > Troubleshoot Arris TM602 Modem

Internet

The Internet should add convenience, not headaches. From step-by-step instructions to helpful tips, we'll help you install your equipment, troubleshoot problems, and get the most out of your online experience – minus the migraine.

Back Print Article

Troubleshoot Arris TM602 Modem

Last Updated: Thu, 07 Mar 2013 > Related Articles

1 rated this

Summary

Troubleshooting information for the Arris TM602 modem.

Solution


Installation

If you need help setting up your cable modem, refer to the following articles.

 


Front View

Back View

Modem Lights

Important: This modem is a Voice Over IP Modem. If the modem is reset, you will lose phone service.

The TM602 has eight indicator lights. The following table describes the light patterns during normal operation.

Modem LightStatusProblemSolution
PowerSolid GreenNoneN/A
Flashing GreenNo power / good batteryVerify power supply connections and electrical outlet. Also make sure the outlet is not connected to a switch.
OffNo power / no batteryVerify power supply connections and electrical outlet. Also make sure the outlet is not connected to a switch.

DS (Downstream)

Solid GreenNoneN/A
Flashing GreenNo Connectivity to InternetVerify all cable connections. Try resetting the modem. If connection is OK and modem reset does not correct the problem try re-provisioning the modem.
Off Verify all cable Coaxial connections and try resetting the modem. Verify there isn't an outage in the area.

US (Upstream)

Solid GreenNoneN/A
Flashing GreenNo Connectivity to Internet or in Standby ModeVerify all cable connections. Try resetting the modem. If connection is OK and modem reset does not correct the problem try re-provisioning the modem.
Off Verify all cable Coaxial connections and try resetting the modem. Verify there isn't an outage in the area.
OnlineSolid GreenNone.N/A
OffInternet not availableVerify all cable connections. Try resetting the modem. If connection is OK and modem reset does not correct the problem try re-provisioning the modem.
LinkSolid GreenNoneSuccessfully found the computer through an Ethernet connection.
Flashing GreenNoneModem is transferring data.
OffNo Ethernet foundVerify Ethernet cable connections, the TCP/IP settings and the NIC. You might need to reinstall the NIC drivers. If this does not resolve the issue, try re-provisioning the modem.
Telephone 1Solid GreenNoneService available phone on-hook.
Flashing GreenPhone off hookHang up the phone
OffService not available 
Telephone 2Solid GreenNoneService available phone on-hook.
Flashing GreenPhone off hookHang up the phone
OffService not available 
BatterySolid GreenNoneBattery good
Flashing GreenBattery badVerify power is connected to the modem.
OffBattery missing 

Troubleshooting Tips

ProblemPossible Fixes
Data and telephone services are out
  1. Check power connections.
  2. Check cable connections (Is the TV working?). If yes, press the Reset button.
Data service is not working using the USB port (Windows XP and Windows Vista), telephones work
  1. Check the USB cable connections. Disconnect and reconnect the USB cable from the Telephony Modem and computer.
     
    Note: If you are using a powered USB hub, ensure the hub is turned on.
     
  2. Did you load the USB drivers? If not, load the drivers.
  3. Reboot the computer.
  4. Press the Reset button on the back of the Telephony Modem.
Data service is not working using the USB port, telephones work
  1. Attempt recovery action listed above.
  2. Reinstall USB drivers by following these steps:
     
    1. Disconnect the USB cable between the computer and the Telephony Modem.
    2. Use the ARRIS Uninstall utility (remove.exe on the ARRIS driver CD) to remove the improperly-installed driver.
    3. Reboot the computer.
    4. Reinstall the USB drivers.
Data service is out (Ethernet), telephones
work
  1. If the Link LED is off, check the Link LEDs at the Telephony Modem and the connected computer or hub.

    Notes:
     
    • If you are using a hub, is the hub turned on?
    • Are you using the right Ethernet cable? Use a straight cable for direct connection to a computer or cross-over cable for connection to a hub.
  1. Press the Reset button on the back of the Telephony Modem. Telephone service is out, data works.
  2. Is the Telephone LED for the line lit? If not, contact your cable operator for assistance.
  3. Make sure all phones on the line are hung up properly.
  4. On remote and powered phones, check power and battery status.
  5. Check the telephone cables to ensure they are connected tightly and the cables are not cracked or broken.
  6. If a “fast busy” is heard, contact the contact the cable operator for assistance.

Manufacturer Resources


Rate this Article:

Related Topics:

Equipment Setup, Equipment Setup

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested Internet Topics