Your friend in the digital age
Skip To Menu
Skip To Content
You are here: Residential Home > Support > TV Support > Equipment Setup > Install Telephone Modem Battery

TV

Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.

Back Print Article

Install Telephone Modem Battery

Last Updated: Mon, 06 Aug 2012 > Related Articles

3 rated this

Summary

Use this article for instructions on how to install the lithium-ion battery in the emta telephone modem.

Solution

1
Unplug the power cord and remove the battery cover on the bottom of the modem. Your service will be briefly interrupted.

Spanish: Quite el cable de corriente y
la tapa negra de la batería de la parte inferior de la unidad.
2

Gently remove the old battery and replace with the new battery. 

Spanish: Empuje hacia arriba la aleta debajo del símbolo de la batería y quite la batería usada deslizándola con cuidado.

3

Replace the battery cover and plug the power cord back in. Verify the battery power LED is blinking green. 

Spanish: Coloque la nueva batería con firmeza en la ranura, vuelva a colocar la tapa de la batería y enchufe el cable de corriente en la unidad. Debe aparecer una luz verde en el frente del módem de teléfono digital..

Note: It may take several minutes for the modem to reset.

Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?