Your friend in the digital age
Skip To Menu
Skip To Content
You are here: Residential Home > Support > Internet Support > Equipment Setup > Joohong SL2810 Cable Modem

Internet

The Internet should add convenience, not headaches. From step-by-step instructions to helpful tips, we'll help you install your equipment, troubleshoot problems, and get the most out of your online experience – minus the migraine.

Back Print Article

Joohong SL2810 Cable Modem

Last Updated: Thu, 12 May 2011 > Related Articles

1 rated this

Summary

Learn about the available ports and an explanation of the status lights on a Joohong SL2810 cable modem.

Solution


Installation

If you need help setting up your cable modem, refer to the following articles.


The Joohong SL2810 is a DOCSIS 2.0 cable modem. 

Front View

After the cable modem has successfully registered on the network, the PWR, ACT, and USB or LAN indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.

Back View

The Joohong SL2810 has the following ports available on the back of the modem:

  • PWR - Connects the cable modem to the power adapter.
  • USB - Connects to the USB port on your computer.
  • LAN - Connects to the Ethernet port on your computer.
  • CC - Connects to the cable wall outlet.

Modem Lights

The modem lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below.

Ethernet Connection - Modem functioning correctly

USB Connection - Modem functioning correctly

Modem Looking for Cable Connection 

Modem LightStatusProblemSolution
PWRSolid GreenNone. Power is properly connected.N/A
OffNo power.Verify power supply connections and electrical outlet. Also make sure the outlet is not connected to a switch.
ACTSlow
Flashing		Searching for cable connection.Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support.
Fast Flashing ModemSearching for cable connection.If this is a new modem or a replacement modem, you must contact Cox with your MAC address Click Here. If there are several MAC addresses on the modem, please use the “CM” MAC address. View MAC Address Label
OffNo connection cable Connection.Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support.
DATFlashing GreenNone. Modem is transferring data.N/A
LANSolid GreenNone. Successfully found the computer through an Ethernet connection.N/A
OffNo Ethernet found.Verify Ethernet cable connections, the TCP/IP settings and the NIC. You might need to reinstall the NIC drivers. If this does not resolve the issue, contact Customer Support.
USBSolid GreenNone. Successfully found the computer through USB connection.N/A
OffNo USB found.Verify USB cable connections, the TCP/IP settings and the USB cable. You might need to reinstall the USB drivers. If this does not resolve the issue, contact Customer Support.

MAC Address Label

MAC addresses are written as 12 digits containing both letters and numbers (0-9, A-F). A MAC address is unique. The first six characters of the MAC address are unique to the manufacturer of the device.



Rate this Article:

Related Topics:

Equipment Setup

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested Internet Topics