Your friend in the digital age
Skip To Menu
Skip To Content
You are here: Residential Home > Support > Internet Support > Equipment Setup > Ubee (Ambit) SpeedStream 60678EU Cable Modem

Internet

The Internet should add convenience, not headaches. From step-by-step instructions to helpful tips, we'll help you install your equipment, troubleshoot problems, and get the most out of your online experience – minus the migraine.

Back Print Article

Ubee (Ambit) SpeedStream 60678EU Cable Modem

Last Updated: Thu, 01 Dec 2011 > Related Articles

3 rated this

Summary

Provides an overview of the available ports and an explanation of the status lights on a Ambit SpeedStream 60678EU cable modem.

Solution


Installation

If you need help setting up your cable modem, use the following articles:


The Ubee (Ambit) SpeedStream 60678EU is a DOCSIS 2.0 cable modem.

Front View

After the cable modem has successfully registered on the network, the usb or enet, ready, and sync indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.

Back View

The Ubee (Ambit) SpeedStream 60678EU has the following ports available on the back of the modem:

  • power - Connects the cable modem to the power adapter.
  • usb - Connects to the USB port on your computer.
  • enet - Connects to the Ethernet port on your computer.
  • cable - Connects to the cable wall outlet.

Modem Lights

The modem lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below.

Ethernet Connection - Modem functioning correctly

USB Connection - Modem functioning correctly

Modem Looking for Cable Connection 

Modem LightStatusProblemSolution
POWERSolid GreenNone. Power is properly connectedN/A
OffNo powerVerify power supply connections and electrical outlet. Also make sure the outlet is not connected to a switch.
USBSolid GreenNone. Successfully found the computer through the USB connection.N/A
OffNo USB foundVerify USB cable connections, the TCP/IP settings and the USB cable. You might need to reinstall the USB drivers. If this does not resolve the issue, contact Customer Support.
ENETSolid GreenNone. Successfully found the computer through an Ethernet connection.N/A
OffNo Ethernet foundVerify Ethernet cable connections, the TCP/IP settings and the NIC. You might need to reinstall the NIC drivers. If this does not resolve the issue, contact Customer Support.
SENDFlashing GreenNone. Modem is transferring data.N/A
RECVFlashing Green

Sync, and Ready LED Off

Modem is searching for cable connection.

Sync and Ready LED On
Modem is transmitting Data		Verify all cable connections and try resetting the modem. If connection is OK and modem reset does not correct the problem, contact Customer Support.
OffNo connection cable ConnectionVerify all cable connections and try resetting the modem. If connection is OK and modem reset does not correct the problem, contact Customer Support.
SYNCSolid GreenNone.N/A
ReadySolid GreenNone.N/A

MAC Address Label

MAC addresses are written as 12 digits containing both letters and numbers (0-9, A-F). A MAC address is unique. The first six characters of the MAC address are unique to the manufacturer of the device.



Rate this Article:

Related Topics:

Equipment Setup

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested Internet Topics