Your friend in the digital age
Skip To Menu
Skip To Content
You are here: Residential Home > Support > Home Security Support > Equipment Setup > Adding and Managing Lighting Devices in Cox Home...

Home Security

Learn how to protect, connect, and relax with support for your Home Security service. From arming and disarming your alarm, to managing your portal, Cox Home Security Support helps you with troubleshooting and step-by-step solutions.

Back Print Article

Adding and Managing Lighting Devices in Cox Home Security

Last Updated: Fri, 17 May 2013 > Related Articles

Not Rated

Summary

Learn how to add and manage lighting devices using the Cox Home Security Touchscreen and Subscriber Portal.

Solution

Learn how to add and manage lighting devices using the Cox Home Security Touchscreen and Subscriber Portal respectively.

Adding Lighting Devices 

The procedure describes how to add lighting devices using the touchscreen for Cox Home Security.

Lighting devices control whether a light is turned on or off. It can even manage dimmable lights.

1

Touch Settings on the touchscreen home.

 

2

Enter the Master Code to proceed to the Settings menu. 

 

3
From the Setting menu, touch Home Devices.
4
From the Home Devices screen touch Lighting.
5

After Lighting menu loads, touch Add Lights.

Result: The Locating Lighting Devices screen displays.

6
Plug the lighting device into a wall socket and secure it with a screw.
7
Touch Next after device is plugged into a wall socket.
8
Reset the device to factory default to place it in Search mode.
9
To place the device in Search mode, press and hold the On/Off button while plugging into an AC outlet. Once the LED light flashes, release and press the On/Off button again.  As lighting devices are found, an icon displays for that device.
10
When all the lighting devices are found, touch Done.
11
The system notes the number of devices that were found and paired. 
12

Touch Next.

Result: The Configure Lighting Devices screen displays.

13
Touch a lighting device to configure it.
14
After all the lighting devices are configured, touch Next.
15
The Home Devices screen displays with Lights marked done.

Managing Lighting Devices

The Subscriber Portal allows users to remotely monitor and control light devices. The current state of light settings is displayed on the Main screen.

The elements of the Lights options include the luminosity (60% in this case and an on/off notification). 

On the Main screen, in the Lights tool, click Manage Lights or On the Toolbar, click Cameras > Live Video. 

The Lights screen is displayed providing users with the ability to turn the light on or off and set dimming percentage.

 

 


Rate this Article:

Related Topics:

Equipment Setup, Home Automation

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested Home Security Topics