Your friend in the digital age
Skip To Menu
Skip To Content
You are here: Residential Home > Support > TV Support > Equipment Setup > Program the Channel Control Buttons on the Cox...

TV

Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.

Back Print Article

Program the Channel Control Buttons on the Cox Digital Interactive M1054 Remote Control for a TV or VCR

Last Updated: Thu, 24 Jun 2010 > Related Articles

Not Rated

Summary

This article describes how to activate and deactivate Channel Control Lock capabilities on the remote control.

Solution

By default, the remote control’s channel-control capabilities are locked to work only with the cable receiver. Channel Control Lock affects the following buttons on the Cox remote control:

  • 0 - 9
  • CH+
  • CH-
  • ENTER
  • LAST

The buttons are locked so that you do not inadvertently change a channel on your TV or VCR. This article describes how to:

  • Deactivate Channel Control Lock to allow full access to these keys in the TV and VCR modes.
  • Reactivate Channel Control Lock to control only the cable receiver.

This feature does not affect the AUD mode.


Cox Digital Interactive M1054 Remote Control

To deactivate Channel Control Lock and allow the remote to change channels in TV or VCR mode, perform the following steps:

1
On the remote control, press the CBL button once.

Result: The CBL button blinks once.
2
Press and hold the SETUP button until the CBL button blinks twice, then release the SETUP button.
3
Using the number buttons on the remote control, enter 9 - 7 - 3.

Result: The CBL button blinks twice.
4

Press CH- once.

Results:

  • The CBL button blinks four times.
  • Instead of operating the cable receiver's channel tuner when in TV or VCR mode, the remote's channel control buttons now operate the TV or VCR channel tuner.

All steps complete.

To reactivate Channel Control Lock so the remote controls only the cable receiver, perform the following steps:

1
On the remote control, press the CBL button once.

Result: The CBL button blinks once.
2
Press and hold the SETUP button until the CBL button blinks twice, then release the SETUP button.
3
Using the number buttons on the remote control, enter 9 - 7 - 3.

Result: The CBL button blinks twice.
4

Press CH+ once.

Result:

  • The CBL button blinks twice.
  • The remote's channel control buttons are locked to the cable receiver's channel tuner. This is the default setting.


All steps complete.

 


Rate this Article:

Related Topics:

Equipment Setup, Remote Controls

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested TV Topics