Your friend in the digital age
Skip To Menu
Skip To Content
You are here: Residential Home > Support > TV Support > Equipment Setup > Program the Cox CheckMate III, RT-U27 Remote...

TV

Are the cables in your living room creating a jungle? Don't worry – we'll help you untangle things so that Digital Television makes sense. Just pick the category that describes your problem, and we'll guide you through it – step-by-step.

Back Print Article

Program the Cox CheckMate III, RT-U27 Remote Control for a Home Entertainment Device

Last Updated: Thu, 24 Jun 2010 > Related Articles

1 rated this

Summary

If the Cox CheckMate III, RT-U27 remote control does not work with a home entertainment device, program the remote using the steps below.

Solution

Cox CheckMate III, RT-U27 Remote Control

To program the remote to control a device, perform the following steps:
1
Turn on the device that you want the remote control to control.
2
  1. Press and hold the mode button associated with the device that you want the remote control to control and the MUTE button until the red indicator light lights up.
  2. Press and hold the CH up arrow button until the device turns off.
3
  1. Press the MUTE button.
  2. When the device turns back on, press the mode button to lock in the code.

    Result:
    • The red indicator light blinks.
    • If the device does not turn back on, repeat the above steps until it does.

    Note: If you find a code that turns the device off but not back on, repeatedly press the CH up arrow button until you find a code that turns the device back on.

    All steps complete.

 


Rate this Article:

Related Topics:

Equipment Setup, Remote Controls

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need more help?

Suggested TV Topics