• Shopping Cart
  • Contact Us
  • Select a Location
    Select a Location

    Current Location:

    Let us know the location you'd like to browse.

  • View Cart

TV Support

Back Print Article

Program the Cox Millennium 4, M4094 for a TV, DVD, VCR, or Stereo Receiver

Last Updated: Tue, 26 Apr 2016 > Related Articles


The information in this article has been consolidated and moved to a new article. See Programming Your Cox Remote Control for updated content.


Cox Millennium 4, M4094 Remote Control

To program the remote control to control a home entertainment device, perform the following steps.

Turn on the device that you want the remote control to control.


On the remote control, press, once, the mode button associated with the device that you want the remote control to control.
Type of DeviceMode Button
Audio amplifier, tuner, or receiverAUDIO
Press and hold the SETUP button until the LED blinks twice, then release the SETUP button.
  1. Refer to the manufacturer’s codes in the User Guide to locate the code for the type and brand name of the device that you want the remote control to control.
  2. Using the number buttons on the remote, enter the first four-digit code listed in the manufacturer's codes for your device.

    • The LED blinks twice after the last digit is entered.
    • If the LED does not blink twice, the operation was not successful. Repeat steps 2 through 4 using the same code again.

Aim the remote control at the device and press the POWER button once.

Note: If the device does not have a Power button, press the play button located between the fast-forward and rewind on the remote control.


Repeat steps 1 - 5 for each device you want the remote control to control.

All steps complete.


Rate this Article:

Related Topics:

Give us your feedback:


Maximum 500 characters

Back Print Article

Need More Help?