Skip To Menu
Skip To Content
You are here: Business Home > Support > TV Support > Remote Controls > Program the Channel Control Buttons on the Cox DVR...

TV Support

Back Print Article

Program the Channel Control Buttons on the Cox DVR Universal M7820

Last Updated: Mon, 28 Feb 2011 > Related Articles

Summary

Program the Cox DVR Universal M7820 Channel Control Lock.

Solution

Overview

 

By default, the remote control’s channel-control capabilities are locked to work only with the cable receiver. Channel Control Lock affects the following buttons on the Cox remote control:

  • 0~9
  • CH–
  • LAST
  • CH+
  • ENTER
 

The buttons are locked so that you do not inadvertently change a channel on your TV or VCR. This article describes how to:

  • Deactivate Channel Control Lock to allow full access to these keys in the TV and VCR modes.
  • Reactivate Channel Control Lock to control only the cable receiver.

Note: This feature does not affect the AUX mode.

Cox DVR Universal Remote Control

To deactivate Channel Control Lock and allow the remote to change channels in TV or VCR mode, perform the following steps:

 

1
On the remote control, press the CABLE button once.
2
Press and hold the SETUP button until the the CABLE button blinks twice, then release the SETUP button.
3

Using the number keys, enter 9 - 7 - 3. 

Result: The CABLE button blinks twice.

4

Press CH- once.

Results:

  • The CABLE button blinks four times.
  • Instead of operating the cable receiver's channel tuner when in TV or VCR mode, the remote's channel control buttons now operate the TV or VCR channel tuner. 

All steps complete.

To reactivate Channel Control Lock so the remote controls only the cable receiver, perform the following steps:

1
On the remote control, press the CABLE button once.
2
Press and hold the SETUP button until the the CABLE button blinks twice, then release the SETUP button.
3

Using the number keys, enter 9 - 7 - 3. 

Result: The CABLE button blinks twice.

4

Press CH+ once.

Result: The CABLE button blinks twice, indicating the remote's channel control buttons are locked to the cable receiver's channel tuner. This is the default setting.

All steps complete.



Rate this Article:

Related Topics:

Remote Controls

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested TV Topics