Skip To Menu
Skip To Content
You are here: Business Home > Support > TV Support > Remote Controls > Program the Cox Universal M7810 Cable ID Lock

TV Support

Back Print Article

Program the Cox Universal M7810 Cable ID Lock

Last Updated: Mon, 11 Apr 2011 > Related Articles

Summary

Unlock the Cable ID Lock, enter a new manufacturer’s code, and lock the Cable ID Lock again.

Solution

The Cox Universal M7810 Remote Control is preprogrammed and locked at the factory to operate the cable receiver and interactive service provided by Cox.

However, the remote can be reassigned to operate an upgraded or downgraded cable receiver by unlocking the Cable ID Lock, entering a new cable code, and then locking the Cable ID Lock again.

 

Cox Universal Remote Control

To unlock the Cable ID Lock, enter a new manufacturer’s code, and lock the Cable ID Lock again, perform the following steps:

1

Turn on the cable receiver.

2

On the remote control, press the CABLE button once.

3

Press and hold the SETUP button until the CABLE button blinks twice, then release the SETUP button.

4

Using the number buttons on the remote control, enter 9 - 8 - 2.

Result: The CABLE button blinks four times, indicating that the Cable ID is unlocked.

5

Before continuing with this procedure, follow the steps in Program the Cox Universal M7810 Remote Control for a TV, DVD, VCR, or Stereo Receiver to locate and enter the new four-digit code for the different cable receiver.

6

After programming the remote control for the cable receiver, on the remote control, press the CABLE button once.

7

Press and hold the SETUP button until the CABLE button blinks twice, then release the SETUP button.

8

Using the number buttons on the remote control, enter 9 - 8 - 2.

Result: The CABLE button blinks twice, indicating the Cable ID is locked.

All steps complete.



Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?