SMC 8004 Cable Modem
Last Updated: Fri, 13 Jan 2012 > Related Articles
Learn about the available ports and an explanation of the status lights on a SMC 8004 cable modem.
The SMC 8004 is a DOCSIS 1.x cable modem.
After the cable modem has successfully registered on the network, the Power, Cable, and Status indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.
The SMC 8004 has the following ports available on the back of the modem:
- CATV - Connects to the cable wall outlet
- USB - Connects to the USB port on your computer.
- ETHERNET - Connects to the Ethernet port on your computer.
- Power - Connects the cable modem to the power adapter.
- Reset - Resets the cable modem.
|Off||No power.||Verify power supply connections and electrical outlet. Also make sure the outlet is not connected to a switch.|
|Blinking Orange||Modem is searching for the downstream.|
|Solid Orange||Downstream frequency found, still looking for upstream.|
|Off||No connection between the Ethernet/USB and the computer.|
|Status||Solid Green||None. Modem is ready for data transfer..||N/A|
|Flashing Green||Modem is registering with headend. Looking for upstream.||Verify all cable connections and try resetting the mode. If this does not resolve the issue, contact Customer Support.|
|ETH||Solid Green||None. Successfully found the computer through an Ethernet connection.||N/A|
|Off||No Ethernet found.||Verify Ethernet cable connections, the TCP/IP settings and the NIC. You might need to reinstall the NIC drivers. If this does not resolve the issue, contact Customer Support.|
|USB||Solid Green||None. Successfully found the computer through USB connection.||N/A|
|Off||No USB found.||Verify USB cable connections, the TCP/IP settings and the NIC. You might need to reinstall the NIC drivers. If this does not resolve the issue, contact Customer Support.|