Skip To Menu
Skip To Content
You are here: Business Home > Support > TV Support > Remote Controls > Program the Cox Digital Interactive AT8400 for a...

TV Support

Back Print Article

Program the Cox Digital Interactive AT8400 for a TV, DVD, VCR, or Stereo Receiver

Last Updated: Thu, 07 Apr 2011 > Related Articles

Summary

If the Cox Digital Interactive AT8400 does not work with one of your home entertainment devices, program the remote using the steps below.

Solution

Cox Digital Interactive AT8400 Remote Control

To control devices other than the default brands, perform the following steps:
1
  1. Turn on the device that you want the remote control to control.
  2. Before moving to step 2, read steps 2 through 5 completely. Highlight or write down the codes and device you want to program.
2
Press and hold the SELECT button and the appropriate mode button until all of the mode buttons blink twice.
 
Type of DeviceMode Button
Cable receiverCBL
TV and HDTVTV
VCR, DVD player, PVR, and CD playerVCR
Receivers, audio amplifiers or tunersAUX


Example: To program the TV button, press and hold SELECT and TV.

Note: If you reassigned a button to work in a different mode, you can program the button to work with a device associated with the new mode.

For additional information on reassigning buttons, refer to Reassign Device Buttons on the Cox Digital Interactive AllTouch Remote Control.

3
  1. Refer to the manufacturer’s codes to locate the code for the type and brand name of the device that you want the remote control to control.
  2. Using the number buttons on the remote, enter the first four-digit code listed in the manufacturer's codes for your device.

    Result: All mode buttons blink twice
4

Aim the remote at the device, and then press the POWER or CH + button (or press the Play button on the device itself).

Result:

  1. The device performs the operation associated with the selected button.

    For example, if the POWER button is pressed, the device turns off.
  2. If the device does not operate properly, repeat steps 2 – 4, trying each code listed in the manufacturer's codes for the device brand until you find one that works.
5
Repeat steps 1through 4 for each device you want the remote control to control.

All steps complete.

 


Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?