Skip To Menu
Skip To Content
You are here: Business Home > Support > Data Support > Equipment > Motorola SB5100 Cable Modem

Data Support

Back Print Article

Motorola SB5100 Cable Modem

Last Updated: Fri, 06 May 2011 > Related Articles

Summary

Learn about the available ports and an explanation of the status lights on a Motorola SB5100 cable modem.

Solution

The Motorola SB5100 is a DOCSIS 2.0 cable modem.

Front View

After the cable modem has successfully registered on the network, the Power, Receive, Send, and Online indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.

Back View

The Motorola SB5100 has the following ports available on the back of the modem:

  • Power - Connects the cable modem to the power adapter.
  • CABLE - Connects to the cable wall outlet.
  • USB - Connects to the USB port on your computer.
  • ETHERNET - Connects to the Ethernet port on your computer.

Modem Lights

The modem lights indicate the current status of your cable modem. To troubleshoot any connection problems, use the table below.

Ethernet or USB Connection - Modem functioning correctly

Modem in Standby - Press the standy button to restore back to normal

Modem Looking for Cable Connection 

Modem LightStatusProblemSolution
PowerOffNo power.Verify power supply connections, the power switch on the modem itself, the electrical outlet, and make sure the outlet is not connected to a switch.
FlashingAn error has occurred during normal operation.Verify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.
ReceiveSlow
Flashing		Searching for cable connection.Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support.
Fast Flashing ModemSearching for cable connection.If this is a new modem or a replacement modem, contact Cox with the MAC address. If there are several MAC addresses on the modem, use the HFC or RF MAC address. View MAC Address Label.
OffNo connection cable connection.Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support.
SendFlashingScanning for the upstream frequency.Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support.
OnlineFlashingScanning for the network connection.Verify all cable connections and try resetting the modem. If cable is OK and modem reset doesn't work, contact Customer Support.
ActivityBlinkingNone. Transmitting or receiving data.N/A

MAC Address Label

SB5100 Mac Address

MAC addresses are written as 12 digits containing both letters and numbers (0-9, A-F). A MAC address is unique. The first six characters of the MAC address are unique to the manufacturer of the device.

Manufacturer Resources



Rate this Article:

Related Topics:

Equipment

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested Data Topics