Skip To Menu
Skip To Content
You are here: Business Home > Support > TV Support > Remote Controls > Program the POWER Button on the Cox Millennium 4,...

TV Support

Back Print Article

Program the POWER Button on the Cox Millennium 4, M4094

Last Updated: Tue, 12 Apr 2011 > Related Articles

Summary

You can program the POWER button on the Cox Millennium 4, M4094 to turn on or off all home entertainment devices with a single push of the button.

Solution

Cox Millennium 4, M4094 Remote Control

Once programmed, you must be in cable mode for the feature to work. In all other modes, the POWER button controls the individual device associated with that mode.  



To set up the POWER button to turn all devices on or off at the same time, perform the following steps:

1
Press and hold the SETUP button until the LED blinks twice.
2

Using the number buttons on the remote, enter 9 - 9 - 5.

Result: The LED blinks twice.

3

Press the POWER button.

4
  1. Press the CBL button.
  2. Press the TV button.
  3. Press the VCR button.
  4. Press the AUDIO button.
  5. Press the CBL button

Note: If you do not want the POWER button to turn a device on or off at the same time as the rest, do not press that button during this step.

For example, if you do not want the VCR to turn on or off when not in VCR mode, skip step c. above.

5

Press and hold the SETUP button until the LED blinks twice.

Result:

  • When you press the CBL button, and then press the POWER button, all devices associated with the CBL, TV, VCR, and AUDIO buttons turn on or off.
  • The remote control stays in cable mode.

All steps complete..

 


Rate this Article:

Related Topics:

Remote Controls

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested TV Topics