Cisco DPC3010 Cable Modem
Last Updated: Fri, 06 May 2011 > Related Articles
Learn about the available ports and an explanation of the status lights on the Cisco DPC3010 Cable Modem.
The Cisco DPC3010 is a DOCSIS 3.0 cable modem. If this modem is used with the Ultimate Internet, only available in limited markets, and a Microsoft operating system other than Vista or Windows 7, the registry keys must be updated to enable maximum speed performance.
After the cable modem is successfully registered on the network, the POWER, DS, US, and ONLINE indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.
The Cisco DPC3010 has the following ports available on the back of the modem:
- POWER - Connects the cable modem to the power adapter.
- ETHERNET - Connects to the Ethernet port on your computer.
- USB - Connects to the USB port on your computer.
Note: Some models may not include USB.
- RESET - Used to reset the modem.
- CABLE - Connects to the cable wall outlet.
Note: The RESET button is for maintenance purposes only. For more details, refer to the Modem Lights section
|Off||No power||Verify power supply connections and electrical outlet, also make sure the outlet is not connected to a switch.|
|Blinking Green||Modem is establishing a connection from the Internet to the computer.||Verify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.|
|Blinking Green||Modem is registering with headend. Looking for upstream.||Verify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.|
|Off||Modem is establishing a connection from the computer to the Internet.||Verify all cable connections and try resetting the modem. If cable is OK and modem reset does not work, contact Customer Support.|
|LINK||Solid Green||None. A single device is connected to either the Ethernet or USB port and no data is being sent to or from the modem.||N/A|
|Blinking Green||None. A single device is connected to either the Ethernet or USB port and data is being transferred between the PC and the cable modem.||N/A|
|Off||No devices connected.|