Ubee (Ambit) SpeedStream 60678EU Cable Modem
Last Updated: Fri, 13 Jan 2012 > Related Articles
Learn about the available ports and an explanation of the status lights on a Ubee (Ambit) SpeedStream 60678EU cable modem.
The Ubee (Ambit) SpeedStream 60678EU is a DOCSIS 2.0 cable modem.
After the cable modem has successfully registered on the network, the usb or enet, ready, and sync indicators illuminate continuously to indicate that the cable modem is online and fully operational. For more details, refer to the Modem Lights section.
The Ubee (Ambit) SpeedStream 60678EU has the following ports available on the back of the modem:
- power - Connects the cable modem to the power adapter.
- usb - Connects to the USB port on your computer.
- enet - Connects to the Ethernet port on your computer.
- cable - Connects to the cable wall outlet.
|POWER||Solid Green||None. Power is properly connected||N/A|
|Off||No power||Verify power supply connections and electrical outlet. Also make sure the outlet is not connected to a switch.|
|USB||Solid Green||None. Successfully found the computer through the USB connection.||N/A|
|Off||No USB found||Verify USB cable connections, the TCP/IP settings and the USB cable. You might need to reinstall the USB drivers. If this does not resolve the issue, contact Customer Support.|
|ENET||Solid Green||None. Successfully found the computer through an Ethernet connection.||N/A|
|Off||No Ethernet found||Verify Ethernet cable connections, the TCP/IP settings and the NIC. You might need to reinstall the NIC drivers. If this does not resolve the issue, contact Customer Support.|
|SEND||Flashing Green||None. Modem is transferring data.||N/A|
|RECV||Flashing Green||Sync, and Ready LED Off|
Modem is searching for cable connection.
Sync and Ready LED On
Modem is transmitting Data
|Verify all cable connections and try resetting the modem. If connection is OK and modem reset does not correct the problem, contact Customer Support.|
|Off||No connection cable Connection|