Skip To Menu
Skip To Content
You are here: Business Home > Support > TV Support > Remote Controls > Program the Cox Universal M7810 for a TV, DVD,...

TV Support

Back Print Article

Program the Cox Universal M7810 for a TV, DVD, VCR, or Stereo Receiver

Last Updated: Mon, 11 Apr 2011 > Related Articles

Summary

Program the M7810 to control devices other than the default brands.

Solution

Cox Universal M7810 Remote Control

Note: The Cox Universal M7810 Remote Control is preprogrammed to operate the cable receiver provided by Cox, an RCA TV, an RCA VCR, and a Pioneer audio receiver.

To control devices other than the default brands, perform the following steps:
1
  1. Turn on the device that you want the remote control to control.
  2. If applicable, insert video media, such as a VHS cassette or DVD disc.
  3. Please read steps 2 - 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving to step 2.
2
  1. On the remote control, press the appropriate mode button for the device once.
     
    Type of DeviceMode Button
    TelevisionTV
    Stereo amplifier, receiver, or DVDAUX
    DVD, PVR, VCRVCR
    Cable receiverCABLE

  2. Press and hold the SETUP button until the selected mode button blinks twice, then release the SETUP button.

Note: To program the remote for a TV / VCR combination, refer to Program the Cox Universal M7810 Remote Control for a TV / VCR Combination.

3
  1. Refer to the manufacturer's codes to locate the code for the type and brand name of the device that you want the remote control to control.
  2. Using the number buttons on the remote, enter the first four-digit code listed in the manufacturer's codes for your device.

    Result:
  • If the selected mode button blinks twice, the operation was performed correctly.
  • If the selected mode button emits a long blink, the operation was not successful. Repeat steps 2 and 3 using the same code again.
4

Aim the remote control at the device, and then press the POWER button once.

Note: If the device does not have a POWER button, press the Play button on the remote.

Result:

5

Repeat steps 1 through 4 for each device you want the remote control to control.

All steps complete.



Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?