Skip To Menu
Skip To Content
You are here: Business Home > Support > TV Support > Remote Controls > Program the Cox Digital Interactive M1054 for a...

TV Support

Back Print Article

Program the Cox Digital Interactive M1054 for a TV, DVD, VCR, or Stereo Receiver

Last Updated: Fri, 11 Mar 2011 > Related Articles

Summary

Follow these steps to program the remote control to control devices other than the default brands.

Solution

 

The Cox Digital Interactive M1054 Remote Control is preprogrammed to operate:

  • Digital cable receiver from Cox
  • RCA TV
  • RCA VCR
  • Toshiba DVD player
  • Pioneer audio receiver


Cox Digital Interactive M1054 Remote Control

To control devices other than the default brands, perform the following steps:

Note: To program the Cox Digital Interactive M1054 Remote Control to control a TV / VCR combination, refer to Program the Cox Digital Interactive M1054 Remote Control for a TV / VCR Combination.
1
  1. Turn on the device that you want the remote control to control.
  2. If applicable, insert video media, such as a VHS cassette or DVD disc.
  3. Before moving to step 2, read steps 2 through 5 completely. Highlight or write down the codes and device you want to program.
2

On the remote control, press the appropriate mode button for the device once.
 

Type of DeviceMode Button
VCR, TV / VCR combo, PVR, second DVD playerAUX
DVD playerDVD
Audio amplifier, tuner, or receiverAUD
TelevisionTV
Cable receiverCBL

Result: The selected mode button blinks once.
3
Press and hold the SETUP button until the selected mode button blinks twice, then release the SETUP button
4
  1. Refer to the manufacturer’s codes to locate the code for the type and brand name of the device that you want the remote control to control.
  2. Using the number buttons on the remote, enter the first four-digit code listed in the manufacturer's codes for your device.

    Result:
  • If the selected mode button blinks twice, the operation was performed correctly.
  • If the selected mode button emits a long blink, the operation was not successful. Repeat steps 2 through 4 using the same code again
5

Aim the remote control at the device and press the PWR button once.

Note: If the device does not have a Power button, press the play button located between the fast-forward and rewind on the remote control.

Result:

6
Repeat steps 1through 5 for each device you want the remote control to control.

All steps complete.

 


Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?