Skip To Menu
Skip To Content
You are here: Business Home > Support > TV Support > Remote Controls > Remote Control Won't Work

TV Support

Back Print Article

Remote Control Won't Work

Last Updated: Mon, 18 Apr 2011 > Related Articles

Summary

Find quick fixes for remote controls that do not work.

Solution

Please refer to the Index of Cox Remote Controls for information that may be used to operate and and program your remote control.

 

SymptomPossible CausesQuick Fixes
Remote will not turn on the TV.The remote may not be in Cable mode.

Make sure the TV is OFF. On the Cox remote control, press the Power button once, then press the CBL (cable) button once. 

Result:

The TV turns ON.

Remote works sometime.
  • The Cox remote does not have a direct line of sight to the cable box.
  • Something may be  between the remote and the cable box, blocking the remote’s signal to the cable box.
  • The angle between the remote and the cable box is too large.

 

Aim the remote control directly at the cable box front panel (not the TV or VCR).

Remove obstacles between the remote and the cable box.

Stand in front of the cable box and not too far to either side.

The range of the remote control is 15 feet, via direct line of sight to the cable box.

Remote will not change channels or turn on the TV.Batteries may be depleted.

Try this quick test: Press the Power button on the front of the cable box. If the box turns ON or OFF, then it’s the remote -- install new batteries in the remote.

Also verify the equipment is plugged in to a power outlet; verify any loose cables are tightened; and if a wall switch controls the power ON/OFF, make sure the wall switch is in the ON position.

 


Rate this Article:

Related Topics:

Remote Controls

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?

Suggested TV Topics