Skip To Menu
Skip To Content
You are here: Business Home > Support > TV Support > Remote Controls > Set the Volume Controls for the Cox Digital...

TV Support

Back Print Article

Set the Volume Controls for the Cox Digital Interactive AT8400

Last Updated: Thu, 07 Apr 2011 > Related Articles

Summary

You can program the Cox Digital Interactive AT8400 to control the volume through a different device.

Solution

Cox Digital Interactive AT8400 Remote Control

 

The Cox Digital Interactive At8400 Remote Control is programmed to control power in one of the following ways:

  • For a specified device, regardless of the last-selected mode button (TV, VCR, AUX, or CBL)

    Note: In AUX mode, the remote always controls the volume for the device assigned to the AUX button.
  • For the device associated with the last-selected mode button

Note: To test your remote to see how it currently controls the volume for different devices, press the volume control buttons while in different modes.

Volume control settings affect the following buttons:

  • VOL+
  • VOL-
  • MUTE

Note: To assign volume control to a Cox digital cable receiver, complete the following steps before continuing:

  1. Press the SETTINGS button to access the General Settings onscreen menu.
  2. Verify that the Audio: Volume Control setting is Variable.

To set the volume controls to control volume for a specified device regardless of the last-selected mode button, perform the following steps:

  1. Press and hold the SELECT button and the CBL button until all mode buttons blink twice.
  2. Using the number buttons, enter 9 - 9 - 3.

    Result: The CBL button blinks twice.

  3. Press the mode button associated with the device you want the volume controls to control.

    Result:

    • All mode buttons blink three times.
    • The volume controls control only the device associated with the mode button you selected, regardless of the current mode.

    All steps complete.

To set the volume controls to control volume for the device associated with the last-selected mode button, perform the following steps:

  1. Press and hold the SELECT button and the CBL button until all mode buttons blink twice.
  2. Using the number buttons, enter 9 - 9 - 3.

    Result: The CBL button blinks twice.

  3. Press the SELECT button.

    Result:

    • All mode buttons blink three times.
    • The volume controls control the device associated with the last-selected mode button.

    All steps complete.

 


Rate this Article:

Related Topics:

Give us your feedback:

Feedback

Maximum 500 characters

Back Print Article

Need More Help?